 |
||||
|
||||
| Area Laser Sensor | ||||
 |
ALS D Specification | (107 k) | ||
| 3-Track Detection System | ||||
|
3 Track Specification |
(410 k) |
||
| Laser Fence Sensor (LFS) Family : | ||||
| I |  |
LFS A 60 |
(137 k) | |
|
LFS A 100 |
(137 k) | ||
|
LFS A 130 | (131 k) | ||
|
(130 k) | |||
|
LFS A 160 | (148 k) | ||
| II |  |
LFS_B 30 |
(370 k) | |
|
LFS_B 60 |
(267 k) | ||
|
LFS_B 100 |
(201 k) | ||
|
LFS B 160 | (140k) | ||
| Cross Line Detector (CLD ) | ||||
|
CLD Specification | (255 k) | ||
| Dense Laser Curtain (DLC) | ||||
| Fence Guard System FGS-02 | ||||
| |
FGS-02 Specifiction | (296 k) | ||
| Security System Integrartion Software (SSIS) |
||||
| High Performance Geophone System | ||||
|
GLS-20 Specification | (257 k) | ||
|
HPDS Specification | (288 k) | ||
 Dry Contact Board |
||||
 |
||||
| Perimeter Security | ||||
| Aircraft Protection System | ||||
| Anti-Pirate Security System | ||||
| Applications of ALS | ||||
| Applications of LFS | ||||
| Applications of CLD | ||||
| Dual Tech Seismic Virtual Fence (DTSV) | ||||
| Fast Deployment | ||||
 |
||||
The DTCLD is a high security system. It detects intruders, if they cross the detection area. This detection area covers a distance of up to 100m.
The installation of DTCLD’s must provide an overlap of 10% between detection areas in order to ensure a continuous detection space.
Each unit of DTCLD includes:
- Laser detection system
- M/W Doppler Radar
- High sensitivity CCTV B/W camera
- Laser illumination for pitch darkness places (Optional)
- Video compress / LAN communication processor
- Sealed housing
In order to save power consumption, the DTCLD system stays in PowerSafeMode, and only the M/W Doppler Radar is active. When the M/W Doppler Radar detects an intrusion, the laser detector “wakes up” and confirms detection. The DTCLD system captures pictures from the CCTV Camera and sends them to the Control Room via LAN as an alarm.
The system includes two parallel DTCLD chains. The Control Room is located between those two chains. A PC in the Control Room collects information (alarm and video/pictures) from all DTCLD sensors via wireless LAN, shows it on the screen, saves a report etc.
Specification:
Power consumption: |
|
PowerSafeMode |
12VDC @ 200mA (heater and wireless transceiver not included) |
FullAlarmMode |
12VDC @ 1100mA (heater and wireless transceiver not included) |
Heater |
12VDC @ 500mA |
Detection range |
up to 150m |
